Audio Technica
Audio Technica AT2050 Large Diaphragm Multi-Pattern Condenser w/ Shock Mount
Audio Technica AT2050 Large Diaphragm Multi-Pattern Condenser w/ Shock Mount
Couldn't load pickup availability
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Switchable 80 Hz high-pass filter and 10 dB pad
- Large diaphragm for smooth, natural sound and low noise
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
- Includes shock mount & protective pouch
Features
Play and record vocals, strings and piano with this Audio Technica AT2050 multi-pattern condenser microphone that's also ideal for use for miking guitar amps and drum overheads. Its dual large diaphragms are gold-vaporized for low noise and a natural, smooth sound, and it uses switchable cardioid, omnidirectional and figure-of-eight polar pattern settings to provide consistent performance. This mic comes with a shock mount and pouch so you can get to work right away.
Specifications
| Element | Externally-polarized (DC bias) condenser |
|---|---|
| Polar Pattern | Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern |
| Frequency Response | 20 - 20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | -42 dB (7.9 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) |
| Dynamic Range | 136 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 77 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 4.7 mA typical |
| Weight | 412g |
| Dimensions | 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Accessories Included | AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
- Description
- Features
- Specifications
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Switchable 80 Hz high-pass filter and 10 dB pad
- Large diaphragm for smooth, natural sound and low noise
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
- Includes shock mount & protective pouch
Play and record vocals, strings and piano with this Audio Technica AT2050 multi-pattern condenser microphone that's also ideal for use for miking guitar amps and drum overheads. Its dual large diaphragms are gold-vaporized for low noise and a natural, smooth sound, and it uses switchable cardioid, omnidirectional and figure-of-eight polar pattern settings to provide consistent performance. This mic comes with a shock mount and pouch so you can get to work right away.
| Element | Externally-polarized (DC bias) condenser |
|---|---|
| Polar Pattern | Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern |
| Frequency Response | 20 - 20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | -42 dB (7.9 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) |
| Dynamic Range | 136 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 77 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 4.7 mA typical |
| Weight | 412g |
| Dimensions | 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Accessories Included | AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
Share
